Category Posts Navigation

{diy Projects} Tin Can Table Numbers

Kym

Posted by Kym

Tin Can Table Numbers

Here is a super cute and budget saving idea for table numbers. These tin can table numbers are from 100 Layer Cake blog and they are eye catching! Did I mention they are eco-freindly too.

Materials Needed:

~ Drill (with an appropriately sized bit)
~ Gold spray paint
~ Tape
~ Candles
~ A ruler
~ Letter size colored paper
~ Spray mount
~ Exacto knife
~ Cutting mat
~ and your number stencils, which you can download here.

Instructions…

tin can2

Instructions:

Step 1:  Tape off the inside of your cans so no spray paint gets inside. Spray the outside of each can with the gold spray paint (or any color you like). Be sure you don’t hold the spray can nozzle too close to the tin can, which can make for drippy, runny lines down your pretty table numbers and no one wants that.

You may need to do two or three coats depending on how opaque you want to the color to be.

Step 2:   Once your cans are dry, wrap your printed number stencil around each tin can.

Step 3:   Drill. Yay! Start by drilling the outline of the number first (following the stencil line), and then work your way in. It certainly doesn’t have to be perfect, but the more holes you can drill, the more light your can will give off.

Step 4:   Slide your colored paper into the can on the opposite side as the number. Mark the paper with the appropriate height and width (you don’t want it to cover your numbers. Next trim the paper to the correct size using your cutting mat and exacto.

Step 5:   Spray mount the trimmed paper to the inside of your can (opposite the number). And you’re done! We used red paper but you can of course use whatever color you like. If you’re using a color you’re not sure about, consider doing a test can first and lighting it that night to make sure you like the look before you finish the rest of your numbers.

Project & Photography: 100 Layer Cake

Kym Kym (1091 Posts)

FOUNDER & CEO OF DIY WEDDINGS MAGAZINE, DIY BRIDE, PUBLISHER, ENTREPRENEUR, SOCIAL MEDIA CRAZED, PHILANTHROPY, LOVES EVERYTHING WEDDINGS, JILL OF ALL TRADES AND ENJOYS PAYING IT FORWARD! #diyweddings


  • http://www.becomingthemrs.com/feed/ BecomingTheMrs.com

    We will have to share this one with our readers!

Go To Top
This site is protected by WP-CopyRightPro
Go To Top
This site is protected by WP-CopyRightPro